Course Content and Outcomes Guides (CCOG)

CCOG for APR 278M archive revision 201904

You are viewing an old version of the CCOG. View current version »

Effective Term:
Fall 2019 through Winter 2025

Course Number:
APR 278M
Course Title:
CNC Operation - Mill
Credit Hours:
4
Lecture Hours:
0
Lecture/Lab Hours:
80
Lab Hours:
0

Course Description

Introduces basic operation and setup used with Fanuc (G&M compatible) controlled CNC machining centers. This course is also offered as MCH 278; a student who enrolls in this course a second time under either designator will be subject to the course repeat policy. Audit available.

Addendum to Course Description

CNC Machine Panels - In this module the student is introduced to the functions of the Buttons, Switches and Keys found on CNC Machine Control Units (MCU) for the control of the functions of the control panel display, machine operation, feed, spindle speed, tool changing, axis motion, automatic and manual operation of the machine tool.

CNC Modes - In this module the student is introduced to the five CNC Modes of Operation; Manual; Manual data Input (MDI); Edit; Program Operation - Memory (Automatic) & Tape.

CNC Key Sequences - In this module the student is introduced to the Key Sequences of CNC machine operation for Machining Centers.

CNC Program Verification - In this module the student is introduced to the Concepts of CNC Program Verification such as: Safety Priorities; Running Good Parts; and Verification of Programs.  

PREREQUISITE SKILLS AND KNOWLEDGE:  
MCH 268  

Machining Center Programming and Operation and Workbook, by Mike Lynch, published by CNC Concepts

Intended Outcomes for the course

Upon completion of the course students should be able to:

  • Demonstrate the use of the buttons, switches, and keys found on CNC machine control units (MCU) for the control of the functions of the control panel display, machine operation, feed, spindle speed, tool changing, axis motion, and automatic and manual operation of the machine tool.
  • Explain five CNC modes of operation including manual, manual data input (MDI), edit, and program operation - memory (automatic) and tape.
  • Describe the key sequences of CNC machine operation for machining centers.
  • Demonstrate CNC program verification such as: safety priorities, running good parts, and verification of programs.  

Course Activities and Design

APR 278M CNC OPERATION - MILL will be presented by means of audiovisual presentations, demonstrations, lab experiences, and research activities. The course activities and design emphasize the development of skills and knowledge competencies prescribed by business and industry performance standards. The identified competencies will be achieved by means of individual and team activities.

Outcome Assessment Strategies

1. LAB ACTIVITIES - Participation in structured laboratory exercises with the emphasis on developing skills or increasing expertise in the areas of study identified in the module packets.

2. FINAL ASSESSMENT - An assessment in the form of a written exam and/or practical application that addresses the subject areas identified in the module packets. Students are required to complete final assessment activities with 85% competency.